Micro 3D CableCam 50 meter .jpg)
The Micro 3D CableCam 50 meter is the smallest system (only indoor)in our portfolio. The dolly has been designed to be ultra-low in weight, with power supply via two cables meaning that it requires no on-board batteries. Weighing only 4.5 kg and with no issue regarding cable-sag, the system’s innovative design means it can be deployed in small studios and venues with low ceilings. It covers 50 x 50 m, while zoom and all other camera functions can be controlled using the provided software.
We offer the Micro 3D CableCam 50 systems with an 50 x 50 m action area. The lightweight winches can be rigged directly to a truss, enabling total suspension of the system with no interference on the ground. The system incorporates a bullet-proof hardware control and software GUI, enabling unlimited motion presets. All camera/dolly data, signals and power supply run through the ropes (2 ropes with implemented fibre cables, 2 ropes with implemented power cables). The dolly can be equipped with broadcast and COTS cameras, allowing access to all camera functions (zoom, etc).
3-Axis Stabilized Gimbal
- Gimbal-Top: 40 cm x 40 cm
- Height: 52 cm
- Weight: 3.7 kg (+ camera, lens, zoom mount 1 kg)
- Motion in all 3 axes
- Built in Dual SDI to Dual/Single Fiber Optic converter
- 48 V DC power supply, communication and 4K signal transferred via winches
- No battery required
- Integration for Sony full-frame 4K camera or Blackmagic Design Micro Studio 4K camera
- Olympus M. Zuiko Digital ED 7-14mm f/2.8 PRO Lens
Winches
- 80 x 80 m action area (motor included)
- Length: 99 cm
- Width: 53 cm
- Height: 40 cm
- Weight: 80 kg
- Maximum speed of 3 m/s
- Winch power: 1.5 kW
- Can be rigged to truss directly
- Winches are sealed
- Hollow winch drum with built-in motor and gear for reduced weight
- Built-in driver box for shorter setup time and reduced weight
Dynamic Pulleys
- Dynamic pulleys enable flexible winch positioning
Remote RCP, Camera Console,Pilot Console, GUI
- Smart GUI enables manual control and programmable motion presets; touchscreen supported
- Remote RCP offers access to all Gimbal, winch and camera functions
- Pan, tilt, roll, focus and zoom. Adjustable speed, ramp (expo) and direction
- Backup custom user profiles
- Working area limitations for safe operation
- Emergency stop button + safety key
- Safety limits, including minimum operating height limit
- Safety – DGUV17/18 (prev. BGV-C1)